Cast Bullets | Central Plains Enterprises,llc

Revolver chambering issues with cast bullets, article three, the measurements.

I finally got around to measuring the cylinder on my Dan Wesson 44 magnum and slugging the bore.  Here are the results, all measured with pin gauges with extremely tight tolerances.  The chambers all measured .458, the throats were from...

Revolver chambering issues with cast bullets, article two, the plan to fix it.

  This is article two of a series on my Dan Wesson revolver.  It outlines the problem and decision making process to arrive at the solution.  Observe, identify and correct.  Article one outlines the problem with my Dan Wesson 44 magnum cylinder...

Revolver chambering issues with cast bullets, article one, we have a problem!

  Earlier this summer my neighbor was excited to work a load up for Central Plains Enterprises, LLC’s heavy 44 cast bullet.  It’s the 315 grain truncated flat point sized at .429 for use in the 44 magnum.  Having a...